I cut all the aluminum angle iron and bent the 3 square levels out of it (I ended up making a 4th level when all was said and done), I have the bottom of the work area and the the top board that I was going to use for the CoreXY platform that my friend Chris gave me and cut to size.
I said was because I somehow cannot do math and did the frame a little taller than what I really needed so I am going to leave my options open as the precision shafts do come in a 36" inch version as well (sounds like I am bragging almost :-) ) so I made a 4th level, on the top I will put the 3/4" MDF with the 10" hole cut in it and probably mount the filament up there out of the way or it will become a catch all sorta shelf for things to vibrate until they fall down into the printer, we will see, and then Chris in his abundance of kindness and friendship is going to cut me another piece of MDF for the CoreXY with a 12" hole so I can get that 11" x 11" build platform in the future.
No comments:
Post a Comment